Technical Problem with rear shock!

Currently reading:
Technical Problem with rear shock!

Joined
Oct 13, 2006
Messages
10,264
Points
1,600
Location
Glasgow
Hey ,

I was trying to remove the rear shock, the problem the nut on the top has broken off the welding and so i put a spanner try to hold it and take the bolt off.

Now the nut has been rounded :( ...

IS there anyone have anyway of taking it off >.< ???

I really need some advice people..

thanks
Ming
 
No, you just want to stop the nut turning, lock it up with the mole, they will move about but will not turn full circle. Then use the spanner on the bolt to undo.

I am guessing you didn't use lusol prior to starting!!

If there is enough room, you might get a splitter in there.

Cheers

D
 
i used WD40, but after like 2-3 turns the nut just snap off from welding :'(.

I have tried using that, seems hard to grip it tight there .... , but i'll try again!! would garages able to get it off for me ?? ??
 
~~ See i also mess things up >.<, and your like the only person that can help... and your are a god send when it comes to these stuff, always have a solution!!!

Sorry for always troubling you >.< >.<

thanks again, see you tomorrow!!
Ming
 
hey hey,

I did have it with me, but i feel bad asking you to do all these things for me >.<..

I got it done today with eased, thanks again for taking that off for me ....

Next time, i'll bring you a box of choclate :):)

thanks
Ming
 
Back
Top