General Pre-Cut Window Tinting?

Currently reading:
General Pre-Cut Window Tinting?

Mastery

Banned
Joined
Feb 18, 2006
Messages
462
Location
London
I tried this and failed it takes hours so instead of riskin it i went to get it done professionaly.
 

Rob_Punto

New member
Joined
Jul 24, 2006
Messages
89
Location
Stoke on Trent - Cheshire
if i was u m8y i wood get this!!!

Punto Sunblinds

lastscan.jpg


no mess easy 2 fit!!

Part Number 46002921

if u want 2 see a pic of then i will do 1 4 u m8y

Rob
 

Steve-0

Born to be riled
Joined
Dec 20, 2005
Messages
183
Location
Wakefield
Putting window tints on is not easy mate

If i were you I'd save up and have a pro do it, i've tried twice now and failed misserably

Steve
 

jug

blessed are the apostates
Joined
Nov 28, 2005
Messages
27,935
Location
Durham
Steve-0 said:
i've tried twice now and failed misserably

haha me too! its bloody tricky.

easier way from back in the day is to take the glass out and spray it with 20% black paint 80% laquer (and then mix that 50/50 with thinner) on the inside of the window (thats the inside, not the outside). that works a treat, and you'd think it would scratch off easily but it doesn't at all. plus tint film peels and bubbles so paint can stay in good condition longer. to do the back window just remove the tailgate and mask off the surrounding bodywork. easy peasy. and if you make a mess of it you only need some thinner to get it off and start again.

if you havent got a compressor and sprayer you could probably use that tint spray stuff in a can instead, but it'll cost way more.
 
Top