markdarbypearson
Member
- Joined
- Jan 16, 2020
- Messages
- 210
- Points
- 124
My punto is at the very start of its heavy steering saga. When I bought it 2 months ago it had been stood a while with algae on crevices and really damp steaming up cabin and water in spare wheel well. I replaced battery, fixed leaks and checked what earth points/connector from motor to ecu that I could find.
The heavy steering has happened twice since on cold mornings either immediately when turning under load, two minutes later when driving straight and slowing for lights, and once when stationary at traffic lights.
My question is: Could this be purely a dodgy wire/connector and not the dreaded torque sensor/column replacement scenario?
If so, any pointers to possible culprit wires/connectors/earth points would be most appreciated ??
The heavy steering has happened twice since on cold mornings either immediately when turning under load, two minutes later when driving straight and slowing for lights, and once when stationary at traffic lights.
My question is: Could this be purely a dodgy wire/connector and not the dreaded torque sensor/column replacement scenario?
If so, any pointers to possible culprit wires/connectors/earth points would be most appreciated ??