here are the basics;

air filter and cam cover removed,

disconnect the electrics to the sensors on cam belt side,
and belt and covers.

then wiring trunking at rear of cylinder ( to injectors) and coil pack wiring
panda maint dec 13 080.jpg see the 2 x slots at rear of head..the trunking clips here,;)

then remove exhaust manifold.best to soak bolts / nuts for days before
see other guide;)

panda maint dec 13 002.jpg
Next page: head bolts >
  • Like
Reactions: sb10 and The Panda Nut