Technical Panda 1.1 active

[boxerdiesel1]

Hi I took delivery of a panda 1.1 active a couple of weels ago and want to fit remote central locking to it has anybody done this or has the information that I need to do it like wire colours plug locations etc.Fiat uk a waste of time.I bought a ws manual of ebay but does not go into enough detail about the wiring system.

 

[pasotibbs]

I also would like to do this but it seems the problems are

1. getting the central locking to work from another trigger without damaging the body computer(it appears you can't just connect to the c/l wiring).

2. the drivers door does not have a locking motor so even if you worked out how to get the central locking to work the Drivers door would not lock/unlock.

The best solution would seem to be to add a lock solenoid to the drivers door and using a Central locking relay from a scrap car wire that to an alarm or use a remote locking kit ?
The solenoid would lock/unlock the drivers door and then the CAN system would work the other doors in the usual way.