Offsets and PCD's

[jonnyyeah]

Hi

Couple of questions for you all!

I m wanting some new alloys for my bravo and have seen quite a few that are 100 x 4. I understand a Bravo is 98 x 4 and 100 x 4's will fit with wobbly bolts.

However what is confusing me is the offset and c/bore. e.g Vauxhall Offsets are i think 35, does this mean that the wheels will fit a bravo as the offset is 30-38? also where does to c/bore come into it?

Does anybody have alloys on there car that would fit a vauxhall

Thanks in advance

Jono

 

[Liam]

Jono,

The 4x98 measurement you talk about is Pitch Circle Diameter, Vauxhall wheels are 45mm - 49mm offset with 4 or 5x100 PCD.

See http://www.tyresave.co.uk/fitment.html#TECH for some more info.

but this post in the Bravo/a Section too.

Liam

**** happens!

 

[dave]

c bore is the hole in the center of the wheel it must be the same as the sticky out bit in the middle of the hub, you get spiggot rings to make the wheels fit this tight, its very important to get this right if using wobble bolts or wheel wont fit center on the hub.

----------------------------------------------------------------------------------
Please do not Email or PM me asking for support. Post on the forums instead. Your reply may help someone else. Thank you