Save up to 15% with Adrian Flux insurance!

Punto Evo OBD2 reader

Currently reading:
Punto Evo OBD2 reader

H

HenrikD

Member
Joined
May 4, 2014
Messages
14
Points
54
Hi all.

Need to diag. my Punto Evo 2012 Mjt 1.3
Bought the MultiECUscan software but i need a better reader then the cheap one i got.
Need to make a ECU BCU readout and a proxy alignment.

What reader can you recomend?
Looking at one of odblinks, and a not sure witch one to get. If any.?
 
HenrikD said:
Hi all.

Need to diag. my Punto Evo 2012 Mjt 1.3
Bought the MultiECUscan software but i need a better reader then the cheap one i got.
Need to make a ECU BCU readout and a proxy alignment.

What reader can you recomend?
Looking at one of odblinks, and a not sure witch one to get. If any.?
Click to expand...

Gendan bundle comes with OBDlink SX USB reader which is what the guys on here recommend I believe.

www.gendan.co.uk

MultiECUScan CAN-only Diagnostic Bundle for some Fiat and Alfa Romeo cars (Single PC)

MultiECUScan CAN-only Diagnostic Bundle for some Fiat and Alfa Romeo cars (Single PC) - only £112.94 including VAT & UK delivery!
www.gendan.co.uk
 
HenrikD said:
Hi all.

Need to diag. my Punto Evo 2012 Mjt 1.3
Bought the MultiECUscan software but i need a better reader then the cheap one i got.
Need to make a ECU BCU readout and a proxy alignment.

What reader can you recomend?
Looking at one of odblinks, and a not sure witch one to get. If any.?
Click to expand...
I have an OBDLink SX. This is a cabled USB connection as opposed to Blue Tooth.

I also have and ELM.

Both were purcahsed from GENDAN. Both work on evertything I've tried.

Personally I would go for the OBDLink SX. A little more expensive but I've seen no reported issues on forums with this interface.

Note also that GENDAN supplied devices all work and they offer god support as well.
 
You must log in or register to reply here.
Back
Top