Technical New Guide Added:- Adding a Pre-AMP RCA Connection

[captain chaos]

Well heres another guide for you all.

Explains how to add a pre-amp RCA connection with or without factory sub.

This would then allow you to use any amp with RCA inputs. Many AMPs out there now except high level inputs, however for the old school amoung us I have added this guide!


https://www.fiatforum.com/grande-punto-guides/116553-adding-pre-out-rca-connection.html

Stand by for the AMP guide!

 

[phostead]

Cheers Captain for another top guide. Presumably you could splice into the power and ground cables in the multiblock to power the new amp too??

 

[puntokris]

Don't use a cable that thin to power an amp

 

[captain chaos]

Hell no!

There not up to the job fella. You wire them to an amp and you risk turning your car into a mobile BBQ lol!

You can however use the grey 12v switch from the loom to act as the amps remote.

As for power im afraid its the good old inline fuse power cable from the battery and ground to the cars body.

I should get round to fitting an amp etc today so will post a guide as and when I get a chance.