New Doblo wiring

[KERABO]

hello

I am wiring up a towbar on my 2010 DOBLO and could do with the colours and their destination for the N/S/R lamp wires. I managed to trace a couple with my voltmeter but some are proving hard to get a reading that makes sense. Only 4 volts on the stop wire yet with the lamp connected it works fine. Starting to think the lamps may be on the CAN network? Either way it will be easier with the wiring manual or even a complete manual. If anyone knows a link to the manual for the later DOBLO I would love to have it.

Merry Christmas All

Ken

 

[2668GRIFFIN]

HI
if its like my fiorino, i had to buy a plug and play towbar box of tricks as i was having the same issues as you are, i was getting bulb failure warnings and all sorts.
I got mine of ebay, and you simply unplug your rear light plugs and replace with the supplied loom you get.
all works fine and took no time at all to fit, the only issue i had was getting a wire to the battery as the box needs its own supply.
LUIGI

 

[KERABO]

Thank you for the reply

Ken