Styling New 18" on my Bravo T-jet

[ascott92]

I know I've spoke to you about this before Rappidpie, but did you need spacers to fit the wheels? According to 1010 offset calculator, you had 1.5cm less clearance on the inside

 

[nanofast]

@ Tad-Bravo yes.. this laptime was made with my bravo (and the very orrible pirelli PZero)

@Rappidpie I love Tomason

 

[Rappidpie]

Have not had spacers on the 18" this summer. but will try next year.
I have spacers on the winter wheels. but is still trying to find the right setup

 

[ascott92]

Have not had spacers on the 18" this summer. but will try next year.
I have spacers on the winter wheels. but is still trying to find the right setup

Using 1010, I thought I would need adapters to get the inside of the wheel sitting at the same point it would be standard. I have 18x8.5 too, but ET35 instead. May just test-fit them and see. Thanks

 

[sprintblue]

sorry,dont like aftermarket alloys and these dont suit the bravo imo.......

as long as you are happy tho.

 

[nanofast]

hi!
do you install also spacers?
i've also bought this tomason

 

[Rappidpie]

hi!
do you install also spacers?
i've also bought this tomason

got 15 mm back and 8 mm in the front. looks fine

TOMASON :slayer:

 

[GrandeGuy]

got 15 mm back and 8 mm in the front. looks fine

On standard bolt length?

 

[nanofast]

where did you bought 15 and 8 mm? they are hard to find.
17mm is soo much and the tyre "bite" on the top

 

[Rappidpie]

where did you bought 15 and 8 mm? they are hard to find.
17mm is soo much and the tyre "bite" on the top

Sorry but don't remember but over the internet from Germany.
the 8 mm one is one on 3 mm plus one on 5 mm together.

 

[Diabloo]

He wants Tomason yourself at Bravo. Is the size 8.5x18 ET30 something bothering you? Rub against the shock absorber? You have to use spacers? I fear that it will interfere, but as you can see here is Bravo on Tomason Please reply