Jbl gt3-12 amp suggestions?

[A2RBEATS]

Hi, ive just brought a JBL 12" sub but with no amp unfortunately. I think the sub is 225W RMS and 1800W peak.. im looking to spend up to £170. I have all the wires and so on so don't worry about them, just the amplifier please..

Cheers

 

[Ruuko]

http://www.caraudiodirect.co.uk/fusion-reactor-am90010-p-6694.html?cadid=3fbb94undga7305ohjbcamppo4

check that out heard really good things about these, i was chatting to a guy called rich who had the loudest car in britain at one point and he adores fusion amps, subs not so much but for the money apparantley there amps are second to none. ps. havent actually heard one myself lol.

http://www.caraudiodirect.co.uk/alpine-mrpm500-p-6399.html?cadid=3fbb94undga7305ohjbcamppo4

Alpine amps are always good all round performers too and I have actually heard this one and can vouch for its ability

 

[volxstu]

http://www.caraudiodirect.co.uk/fusion-reactor-am90010-p-6694.html?cadid=3fbb94undga7305ohjbcamppo4

check that out heard really good things about these, i was chatting to a guy called rich who had the loudest car in britain at one point and he adores fusion amps, subs not so much but for the money apparantley there amps are second to none. ps. havent actually heard one myself lol.

http://www.caraudiodirect.co.uk/alpine-mrpm500-p-6399.html?cadid=3fbb94undga7305ohjbcamppo4

Alpine amps are always good all round performers too and I have actually heard this one and can vouch for its ability

The reactor range isnt quite as good as the powerplant range for fusion.

To the op what speakers do you have and are they amped, you will need a speaker upgrade if you havnt done so already.

I would send a good clean signal to this.
http://caraudiosecurity.com/shop/product/products_id/4250.html
It will slightly over power the sub but this amp is very good you are much better off sticking with JBL on this kind of budget and this one will be future proof buddy.

Where you live, if you are not all that confident with ICE i would recommend you have the amp scoped and also build a decent enclosure for it. If you do it properly that set up should bang.