I was hoping to fit Isofix points to my 2006 panda. Its the 1.1 active and never had the Isofix installed. I was looking at the vast amount of choice available on Amazon but found this part for a Fiat 500 https://www.originalcarparts.com/fiat-500-fixing-kit-for-isofix-child-seat-735450384 the mounting brackets look the same as the seat mounts in my Panda has anyone ever fitted one of these to an older panda do they fit correctly? Can anyone share any solutions they may have. If anyone has an older panda with Isofix I would be grateful if you could have a quick look to see if you have something similar installed.
Currently reading:
Technical Isofix retro fit
short answer I don't know
here's what I do know
On the Panda the isofix was only fitted to cars with a split folding rear seat
The 500 split folding rear seat will fit the Panda if you swap the brackets as well
The bits of information I am missing is the Panda's part number, can't find it on ePer. Also I don't know if it fouls on the original bench seat
hopefully someone can be more helpful will be along shortly
here's what I do know
On the Panda the isofix was only fitted to cars with a split folding rear seat
The 500 split folding rear seat will fit the Panda if you swap the brackets as well
The bits of information I am missing is the Panda's part number, can't find it on ePer. Also I don't know if it fouls on the original bench seat
hopefully someone can be more helpful will be along shortly
