Helmetless Stig
New member
- Joined
- Mar 13, 2020
- Messages
- 3
- Points
- 1
My dad just bought this 1988 panda 4x4. I'm in the US so someone imported it a while back and I don't have any car history really. The rear brakes have been converted to disc brakes, but the calipers are old and sticky and I'd like to replace them. The calipers on the car are stamped Fiat, and on the piston itself it says Bendix Altecna with the number B4263. On the caliper the numbers are what I believe to be 52883 and 603810. They are very hard to read but I traced them with a pencil. Attached are pictures. If these exact calipers are MIA, what calipers would fit? Hopefully something bolt on as the conversion work is done already.
Thanks in advance.
P.S. I know there are no pads in the caliper. I took them out because the caliper is jammed and the brake was stuck on
Thanks in advance.




P.S. I know there are no pads in the caliper. I took them out because the caliper is jammed and the brake was stuck on
Last edited: