General Head gasket change and now wont start

Currently reading:
General Head gasket change and now wont start

addie

New member
Joined
Sep 2, 2006
Messages
1
Points
1
Hi, first post on the forum, but desperate for help.
1999 T reg 60s 1.2.
I have just changed the head gasket due to loss of water and engine overheating, also seemed to be missfiring. 6 months ago changed coil packs ht leads plugs and new battery. after todays head gasket change, tried to start it and sounded like missfire, re-checked cam and crank marks and adjusted timing (out by one notch), then it wouldnt start at all. As I had already put the head back on, and didnt want to replace the gasket again, I removed belt again and rotated crank through 1 turn and repalced. wouldnt start and sounded very wrong. Went back to my original timing settings and still wont start. all plugs seem to be sparking, starting to lose some hair. Any ideas?
 
Back
Top