Thanks for that ! Doesn't help that I am working long hours ( leave home 4.20 am back home 7.30 pm minimum)
And trying to decorate the house, and the car is outside someone else's house and the weather, it all builds up !
Technical Duologic gearbox problem
- Thread starter 18turbo
- Start date
- Replies 44
- Views 878
Currently reading:
Technical
Duologic gearbox problem
And trying to decorate the house, and the car is outside someone else's house and the weather, it all builds up !
Thanks for that, interesting, will have a look at that when I next get to the carBrake switch sometimes come pushed in too far from new
There self adjusting, they pull out gently on a rachet
Take a look here
Brake lights on permanently! | FIAT Panda (Mk3)
In the position of the plug in the pic I’ve indicated the two pins with battery voltage. Is there a relay somewhere for the brakes?www.fiatforum.com
- Joined
- Sep 30, 2013
- Messages
- 281
- Points
- 118
Panda brake light switch is very easy to do, just takes minutes - twist out the old switch, pull out the plunger of the new switch, get an assistant to press the brake pedal, replace the switch, and very slowly release the brake pedal!
Thank you for the advice, it's most welcome,I am going to try and fit it tonight, along with new spark plugs, and give the seats a wash with the Vax, Tuesday, after seats have dried I will take it for a drive and see if any more fault codes come up, and if the gearbox is working as it should! Fingers crossed 
Last night changed brake pedal switch, like MrMagoo said very easy to change, many thanks to him, didn't have time to take car for a drive, hopefully tonight, then check fault codes again, still have timing belt and water pump to change, if weather is good that's a job for Sunday if I am not working !
