Dualogic Assistance, South Africa.

Currently reading:
Dualogic Assistance, South Africa.

pslabb

New member
Joined
May 2, 2019
Messages
4
Points
2
Location
Springs
Good morning all.
I need a little more help with my dualogic gearbox. I'm busy rebuilding my robot. Nearly done, but need help regarding the 3 positioning sensors.
Testing ohms with a multimeter. 1). A-B reading 1253. A-C - start 1263 to 1980 up to about half, then back to 1. 2). A-B reading 1196. A-C - start 1252 to 1998 up to about half, then back to 1. 3). A-B reading 1373. A-C - start 882 to 1993 up to about half, then back to 1. The robot turns about 40%, well within the start to end on the sensors. Please advise whether all thise readings are acceptable. Hope it makes sense. Thank you.
 

Attachments

  • sensor.jpg
    sensor.jpg
    30.4 KB · Views: 64
Back
Top