J C MotorCycles
New member
Hi all Advice would be appreciated 2005 Doblo 1.3 Diesel All been running ok ex wheelchair van
Yesterday, No start - Would not crank. Battery good, all electrics like wiper, lights etc all OK
Traced roblem to ignition switch- after cover removed wiggled connector block - now all OK , have cleaned best I can, but obv do not want to be stuck in future when cover back on
On E Bay seen replacemant ign switches and also a " repair" swith - not sure of difference as some just sell lock but others say lock and switch it is the electrical part I need.
I can buy the whole thing complete It all looks same as mine and look same BUT removining to switch holding bolts ??
Usual anti theft type thiese ones with a connical shape on left side - looks difficult to drill because of slope and very limited acess Any tips ??
Yesterday, No start - Would not crank. Battery good, all electrics like wiper, lights etc all OK
Traced roblem to ignition switch- after cover removed wiggled connector block - now all OK , have cleaned best I can, but obv do not want to be stuck in future when cover back on
On E Bay seen replacemant ign switches and also a " repair" swith - not sure of difference as some just sell lock but others say lock and switch it is the electrical part I need.
I can buy the whole thing complete It all looks same as mine and look same BUT removining to switch holding bolts ??
Usual anti theft type thiese ones with a connical shape on left side - looks difficult to drill because of slope and very limited acess Any tips ??
