Hi everyone new to the group,
I have a 2012 nemo in at the moment with the 1.3 (1248cc) multijet engine. She was starting well and running with plenty of power although did have some white smoke at idle. recently she just cranks and will not start without a sniff of easystart and when she does will not rev up.
Diagnostics when cranking show -
RPM -210ish
fuel rail pressure desired - 82 bar
fuel rail pressure measured - 84 bar
I'm sure this rail pressure is too low? im thinking i have a leaking injector. have ordered some common rail blanking plugs to isolate the rail and test the pressure without the injectors connected but thought id ask opinions on here.
Hope someone may have a bit of advice for me.
Thanks!
I have a 2012 nemo in at the moment with the 1.3 (1248cc) multijet engine. She was starting well and running with plenty of power although did have some white smoke at idle. recently she just cranks and will not start without a sniff of easystart and when she does will not rev up.
Diagnostics when cranking show -
RPM -210ish
fuel rail pressure desired - 82 bar
fuel rail pressure measured - 84 bar
I'm sure this rail pressure is too low? im thinking i have a leaking injector. have ordered some common rail blanking plugs to isolate the rail and test the pressure without the injectors connected but thought id ask opinions on here.
Hope someone may have a bit of advice for me.
Thanks!