connecting 6x9s

Currently reading:
connecting 6x9s

coolme2k

New member
Joined
Jun 20, 2005
Messages
65
Location
Bristol
i have a pair of vibe qb69's but i cant get them to work in the plugs on the back off the headunit (Sony CDX-7500). But they definetly work because i have tested them on the existing wires for the front speakers. Any suggestions?
 
OP
OP
coolme2k

coolme2k

New member
Joined
Jun 20, 2005
Messages
65
Location
Bristol
their not wired up. all there is a neg and pos from each speaker


Dont worry anymore THEY WORK. Cheers people
 
Last edited:

project-cinqy

New member
Joined
May 15, 2005
Messages
646
Location
Coningsby, Lincolnshire
Check the fade on the HU. I know it may sound obvious but it's easily done. also, are they working straight off the hu's wiring, or are you taking a feed from the rear of the car?

Jon+Em
 

chaos

Ah. Not good...
Joined
Jan 16, 2005
Messages
10,602
project-cinqy said:
Check the fade on the HU. I know it may sound obvious but it's easily done. also, are they working straight off the hu's wiring, or are you taking a feed from the rear of the car?

Jon+Em

Umm......................the problem's been sorted. :) Bad earth IIRC.
 
Top