Technical Clutch pedal goes to floor first time used

[bennyinkwell]

Hi
Sometimes in the morning, the first time I press the clutch pedal, it goes slowly to the floor but after that it's fine. Any ideas, please?

 

[flisko]

cable clutch or hydraulic?

 

[bennyinkwell]

Forgot to say that I also have to keep topping up brake/clutch fluid although there are no signs of leaks from brakes or clutch cylinders.

 

[bennyinkwell]

cable clutch or hydraulic?

Hydraulic

 

[flisko]

Forgot to say that I also have to keep topping up brake/clutch fluid although there are no signs of leaks from brakes or clutch cylinders.

you got a leak somewhere for sure as brake fluid doesnt disappear

 

[dukeboys]

you may not have a visible leak but the seals may be worn allowing fluid to leak past them in the slave or master cylinder losing you pressure.

chances are its the slave - check the fitting on the top of the master isnt pushed up out of its locating hold by rust-a sure sign the inside has seen better days.

the slave is easy to change and bleed.

 

[blu73]

:yeahthat:
the slave cylinder is nice and cheap also.