General Clock?? Where?

[serin]

does anyone know how to replace the backlight to the clock??

or could there be another reason why the clocks gone bye bye???

and how much would it be to replace??

BTW: i can still see the numbers if i look at a funny angle!!

 

[mase]

unscrew the dash usin the 3 allen key screws at front, and 2 behind the little plastic bits either side of the clock.

take dash off an u can c 2 screws for the clock face unscrew those an pull clock out, disconnect clock from the wiring switch thing, and u should b able to c bulb holder on the left hand side of the back as u look at it.

twist it 90 degrees an bulb comes out.

replace bulb with new one.

i am usin these bulbs to light mine
http://www.ultraleds.co.uk/product_info.php?cPath=44&products_id=301&osCsid=e4d6e0a19a7918666b2baaa47f6e3b2c

but beware they do need filing down because they are wider than the normal bulbs and must go in a specific way so dont despair if u put it in and it doesnt work, just take the led back out an twist 180 degrees

 

[AIJ29]

My clocks weird aswell it works fine until i turn the lights on then it dissapears completely,when you switch the lights off it comes back but the time has zeroed,well strange.
cheers
Adrian

 

[Dan]

Sounds like u got a wrong voltage bulb somewhere.

 

[HP]

Check the fusebox - anything popped?

 

[AIJ29]

I checked the fusebox when i bought the car all seems o.k.,but i will check the bulbs.
Cheers
Adrian