General Cam Belt

Currently reading:
General Cam Belt

marclanchester

New member
Joined
Oct 30, 2003
Messages
15
Points
6
Location
Fairford, United Kingdom.
Hi to all
I too have just bought P reg sx. Does anyone know when it will need a cam belt change?
Also notice some difficulty in selecting 4 to 5th and back to 4th - Is this common?
Pleased with it overall though as cheap get to work transport.
 
Thanks Pete, another reply tells me that the cam is chain driven?
I will check linkage and cable as you suggest
Mark

<blockquote id="quote"> face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by fixitagaintomorrow
Hi, welcome to the forum.

Cam belts should be done every 36k, for the gear probs check to see if your clutch is adjusted properly and that the linkages aren't loose under the bonnet.

Pete.
Cinq sporting 1242cc
Cinqs&Seis Yahoo group
Clubcento

<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
 
Thanks - look forward to a few happy hours in the company of a Haynes manual!!

<blockquote id="quote"> face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by brickfoot
if it's the 899cc, does'nt have a cam belt. The cam shaft is chain driven and you'll need to check the tension on it. invest in a haynes manual

welcome to the forum


www.brickfoot.co.uk is here!!

Coming soon: Cinq lower than a Prostitute's knickers!
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
 
Back
Top