Technical Brake servo removal

Currently reading:
Technical Brake servo removal

Shanevo6

New member
Joined
May 2, 2022
Messages
1
Points
1
Location
Lydney
Hi I’m trying to remove the brake servo but can’t work out how to disconnect the servo rod from the coupling in tbe passenger footwell any advice please? See pic attached
Rgds
Shane
Fiat a panda 1.3D multijet (2009)
 

Attachments

  • 60144C6F-841C-43C1-A63C-395FC4C55778.jpeg
    60144C6F-841C-43C1-A63C-395FC4C55778.jpeg
    1.7 MB · Views: 85
I'm only guessing as I haven't done it, but it looks like the black plastic housing (with blue paint, I've labelled it '1' in the picture) seems to be part of a retaining device for the servo rod.
I would try prising apart the clips on the white part of the housing (2) to release the black section
02.jpeg

There may be images of the RHD assembly on ePER but I'm getting an error when I try to open pages 2&3: http://eper.fiatforum.com/eper/navi...INT_MODE=0&EPER_CAT=SP&WINDOW_ID=1&GUI_LANG=3
Hope it's of some help - good luck!
 
Last edited:
Back
Top