General Angel lights help

[MK2PuntoDan]

Im in need of help with my angel lights.
Basically i got them today and the lights are the same however for the angel lights there are 2 red and 2 black wires coming from it. I tried putin the black to the from sidelights and same for red and nothing...
Thanks for any help and i have used the search button however i didnt find anything that helped

 

[richie.guy]

You have them the wrong way then.

 

[MK2PuntoDan]

You have them the wrong way then.

Care to explain.
I did try it kinda quick as i only had 20 minutes to get them in and bumper on so if this is what has to be done il try again properly tomorrow

 

[Mr Wild]

The standard 501 sidelights are filament bulbs, they'll light up regardless of which way in you put them. The angel eyes are normally LED and diodes require the correct polarity when you wire them up.

 

[MK2PuntoDan]

The standard 501 sidelights are filament bulbs, they'll light up regardless of which way in you put them. The angel eyes are normally LED and diodes require the correct polarity when you wire them up.

So can i just attach the negatives wires from the angel lights to the negative of the 501 sidelights and same for positive or not??
If not how do you wire them in??
Sorry for all the questions, im just confused lol

 

[MK2PuntoDan]

Still havnt done this, Hope these pictures can aide someone in answering my question. Still dont know were to wire the red and black wires in so they come on with my sidelights

 

[richie.guy]

Cut into the positive going to the sidelight and join the red wire to it.
Do the same for the black and negative.
Job done.

You can't seriously be saying you can't join up 2 wires...

 

[MK2PuntoDan]

I attached the positive and negatives of halos to positive and negative of sidelight and the halos didnt work. Anyone who bought the halo lights of ebay and set up the halos have any pointers???

 

[jay_mz89]

black to black, red, to red, or sometimes white or soemtimes yelloy, generally if thre a blick stripe on the wire or it's all black thats the negative, in terms of lighting there's only twin filament bulbs that have a 3rd wire and thst usually a blue one.

 

[richie.guy]

If you wired them up wrong you may have killed the halos.

 

[BOFH]

What are you using to connect them.

If its those inline crimps you have to use a pair of pliers to close them to make good contact. And really squeeze!!

Mine were Black wires to any Black on the loom. Red to white.

 

[MK2PuntoDan]

What are you using to connect them.

If its those inline crimps you have to use a pair of pliers to close them to make good contact. And really squeeze!!

Mine were Black wires to any Black on the loom. Red to white.

Yea i have done them now lol
Thanks for all the help people

 

[MK2PuntoDan]

Thanks again for all the help
Got some pics but need to upload them n make a members motor thread