Styling Angel Eyes Headlights - Mk2

Currently reading:
Styling Angel Eyes Headlights - Mk2

djedwardsmith

New member
Joined
Apr 23, 2006
Messages
254
Points
49
Basically, I need a near near side headlight, so decided I may as well use it as an excuse to fit some decent ones. However, I'm completely clueless with regards to the terminology, H.I.D, Xenon bulbs, conversion kits blah blah blah.

Anyway, these are the ones I was looking into getting:

https://www.deviantstyling.com/p/74/Fiat_Punto_MK2_Black_Angel_Eye_Halo_Ring_Projector_Headlights

Can any of you kind people shed any light as to if there is anything else I'd need to buy for them to work, and just generally clue me up a little bit? Cheers.
 
So if I bought those, they'd just plug right in and work as normal? No need for anything else extra to be purchased?
 
just to let you know, you will need to remove the front bumper to get your light clusters out, if the torx screws are tight on the bottom, spray them with WD-40 (i did this and it didnt work so i drilleda 6mm hole through my torx screwdriver's handle and pushed a philips screwdriver through to give more leverage, this worked a treat!)
 
Back
Top