CC Zero 1998
New member
- Joined
- Aug 20, 2019
- Messages
- 7
- Points
- 1
I’m new to the forum, so apologies if this has been covered before. I’m currently assembling parts to build a turbo aircooled engine. Panda 30 head and exhaust manifold/heat exchanger - which comes to one outlet avoiding the need to fabricate a manifold. Porsche 924 throttle body, with 32mm and 40mm chokes which operates like a progressive down draught Weber, a spacer between either the throttle body or the Panda manifold and head to carry a fuel injector, I’ll also be able to delete the distributor and go to wasted spark ignition. At present I’ve just got the top end as that let’s me build up the modified section to check dimensions, any fabrication and fitting sensors etc.
I’m looking at various turbos just now, I’m hoping that if anyone has fitted a turbo previously they could point me in the right direction for an oil feed to the turbo?
Thanks in advance.
I’m looking at various turbos just now, I’m hoping that if anyone has fitted a turbo previously they could point me in the right direction for an oil feed to the turbo?
Thanks in advance.