General 500 seats in my Panda

[Myusername]

May I double check with the guru's that front and rear seats from a 2010 500 Lounge spec will fit my 2006 Panda?

I'd really like to have the height adjustment feature for the driver's seat.

Many thanks to the collective.

 

[koalar]

I don't know

the body shells are different.

I don't know anyone who has tried it. Somebody has to be the first to try.

 

[chris3234]

I believe they fit but not directly
I think the mounting rails need to be swapped over so the fixing rivet's have to be drilled out and replaced with a short high tensile bolt

 

[Cinq999]

500 front seats need one of the rear mounting brackets to be swapped over from the original Panda seats.

3 of the 4 mounting points are the same, just the one that needs swapping on each seat (it's riveted to the frame, so will need drilling/cutting).

Rear seats are a bit more complicated.

The bottom bench itself should fit straight in. The two mounting points under the front match up with the Panda.

The main issue is the back part of the seat. On mine I had a fair amount of swapping bits around and trying to get everything lined up. It is doable, but takes a bit of time and effort.

(I have seats out of a Abarth 500, but should be the same as a regular 500, although I took the rear seats out completely after a few months )