Albert Alfvag
Member
Hello guys. I have a slight problem. I need to replace the two drive shaft support bearings on my panda 4x4. The MOT guys didn't like that the actual attachments to the cover shield were broken.
Since the 4x4s aren't covered in the haynes manual I'm not shure how to do it, or how much I need to dissasemble the driveshaft to replace the bearings, so any sort of insight into this would be much appreciated.
Thanks
/Albert
Since the 4x4s aren't covered in the haynes manual I'm not shure how to do it, or how much I need to dissasemble the driveshaft to replace the bearings, so any sort of insight into this would be much appreciated.
Thanks
/Albert