Technical 1242 install

Currently reading:
Technical 1242 install

scrw

Member
Joined
Jun 30, 2003
Messages
280
Points
86
Location
Malpas, Cheshire, United
Its done!
4hours 20 mins [8D] Done on the back of a trailer with an engine hoist, didnt even take the wheels off, will post the piccies at www.chestermodels.com/fiat later.
Everything done except the front pipe so I cant start her ;)
Will be doing that 2 morrow so will be running soon.

Wahoo :D

Steve

Steve Wright

http://www.chestermodels.com/fiat
http://www.offroading.net
 
Nice one, post on here what the performance is like between the two if you would

I have considerably more mods, THAN YOU!​
voldar02.gif
Pssssst my cars for sale​
 
FOrgot to say, 4h 20 on my jack, just with harry to pass the spanners, well chuffed :D
pictures now on my website, link below

Steve Wright

http://www.chestermodels.com/fiat
http://www.offroading.net
 
May I ask, why was the cinq on the back of the trailer during the install?

Shopping List:

-40mm Lowing Springs
Cadamuro Rear Spoiler
Window Tints
Scrapped 1.2 Punto
 
cause thats how i got it to the field, and it doubles as a pit, you can crawl under the trailer, also means that I lowered the engine right to the floor, pushed car from over it and moved it again, no hassle with lifting the car up :)

Steve Wright

http://www.chestermodels.com/fiat
http://www.offroading.net
 
Oh and I couldnt wait, fired her up less front pipe, it lives :D

Steve Wright

http://www.chestermodels.com/fiat
http://www.offroading.net
 
1st prize to centoevo, also easier on the back crawling on grass rather than tarmac, almost comfy :D with my hand was okay tho, covered in cuts from doing up the gear linkage/speedo/alternator :(

Off welding the exhaust 2nite, just the hub nuts then and were rockin :D

Steve Wright

http://www.chestermodels.com/fiat
http://www.offroading.net
 
Back
Top