Hi All

Can someone please confirm this is the correct ECU reset procedure for my 2005 Doblo Cargo 1.9 JTD? Or post up the correct one?

Many thanks

1. Disconnect battery for 45 mins
2. Reconnect battery, and turn ignition to MAR for 90 secs
3. Turn off and leave 90 secs
4. Start engine WITHOUT pressing throttle and let the car idle for 15 mins (I repeat, do not touch the throttle whilst the car is idling)
5. Turn engine off and leave for 10 minutes
6. Start the car and go for a drive, using a number of styles (eg town, motorway, thrash etc)

On most Fiats correct method is the disconnect battery, reconnect, get in and use as normal.

Sometimes need throttle position recaliberation but not normally.

Where did you get the above from

Been trawling the archives for info on my other thread and in a few posts people mention resetting ecu but this was on pandas and stilos? I couldn't find it for Doblo 1.9 JTD so googled it and got that from an Alfa forum.