Technical Brake lines

Currently reading:
Technical Brake lines

PNL

Banned
Joined
Nov 11, 2005
Messages
17,870
Points
2,596
Location
In my house
Evening all (y) I am in the process of buying stainless steel brake lines for my 1.6 dynamic but the people that are supplying them have hit a snag as they are unable to get the specs to make them up what I need to know tonight [if possible] is are the two front lines of equal length and the rear two also of equal length as the company who are making them will be purchasing one of each tomorrow from fiat so that they can fulfill the order. Any help would be appreciated (y)
 
PNL said:
Evening all (y) I am in the process of buying stainless steel brake lines for my 1.6 dynamic but the people that are supplying them have hit a snag as they are unable to get the specs to make them up what I need to know tonight [if possible] is are the two front lines of equal length and the rear two also of equal length as the company who are making them will be purchasing one of each tomorrow from fiat so that they can fulfill the order. Any help would be appreciated (y)


I would have thought the break pipes were of equal length I could not really see the car not been symmetrical. Why not just measure them up on the car ? There will probably be 6 break lines. There is on mine 2 front 2 rear from the calipers to the rigid pipes on the arms. Then 2 from these to the rear sub frame where it attaches to the rigid pipes on the underside of the car
 
Last edited:
55stiloschuey said:
i know its not last night.. but if you still needed to know, the flexis are the same on both sides be it the front or rear..:)

Thanks mate I found this out this morning as I went under the car with a measuring tape:p and lo and behold I have a broken coil spring on the near side :cry: I have just this minute got back in from the mian dealers and they havnt got any springs in stock :bang: so I had to order a pair and just hope that they will be in on Friday I am now going out to jack the car back up because the spring has dropped down around the strut and is touching the tyre so its angle grinder here I come :D
 
Back
Top