Technical Help with ePER to check part compatibility!

Currently reading:
Technical Help with ePER to check part compatibility!

Stilover

New member
Joined
Oct 1, 2020
Messages
6
Points
2
I would be very thankful if someone can help me check ePER to resolve a part compatibility question. I don't have access to a computer where I could check it with Internet Explorer and my knowledge of these things is limited to put it in nice terms.

I'm sourcing a front subframe for 2004 Multiwagon 1.9 JTD (80BHP) and need to know if one from a 115BHP or 140BHP of that model would fit.

If it is of help, the last 8 digits of chassis number: 00445295

And what I take to be a noob question, but would it matter if the subframe is of LHD car?
 
Yes... I got that far too.

The part number appears to be 5070869 which is the same as *some* 1.9 140bhp.

80bhp Stilos seem to use the same sub-frame so the 80 vs 115 question seems to be academic. Unfortunately, the 140 shows two possible options but I can't tell what the distinguishing difference is; so it could be same... or it could be different but it will fit, or it could be different and it won't fit.

Someone with a better ePer than the Forum version or who can interpret the difference might have a better idea.

Ralf S.
 
I've double-checked the chassis number in V5C, so this means it's 115 BHP - I was checking some dodge online directory which said 80BHP..., so that's good news.

I've found one in Holland, it won't matter that it's from a LHD?
 
Back
Top