Hi guys, I was just wondering if a 1.6 Stilo exhaust would fit on a 1.9 multijet.... both a 3 door. TIA

Travis9599 said:

Hi guys, I was just wondering if a 1.6 Stilo exhaust would fit on a 1.9 multijet.... both a 3 door. TIA

Click to expand...

No It won't.
I doubt any part (other than hangers or clamps) from a petrol exhaust system will fit a multijet. There are many variations even with the multijet depending on power, market and year.

Robert G8RPI.

Ok that’s great thanks g8rpi!

Some (Fiat) models and aftermarket exhaust companys use the same exhaust in part or complete both for petrol and diesel...
So no easy answer here, I'm afraid..

They're completely different unfortunately.

The 1.6 seems to have a middle silencer that's the size of an aircraft carrier, whereas the diesel (115 JTD) has a more conventional "two small chambers" arrangement.

The rear silencer is also different, because of the big difference in the mid-section arrangement.

Curiously, the 1.4 rear silencer is the same as the 1.9 JTD (115bhp) but on that one the mid-sections are different, being a single small silencer.

Ralf S.

Indeed,
I checked ePer and it was clear there was no direct coamparison especially as the OP asked about the "exhaust" rather than a particular section.

Robert G8RPI.

Hi guys, sorry to open an old thread but a bargain exhaust has come up for a 2.4 Stilo Abarth and it looks a similar shape to my 1.9 one. Could anyone confirm whether it fits or not? TIA

I

Hi,
Well it looks like a de-cat for starters. It might fit but it's not right for your car and will probably be an MOT fail (after May this year at least).

Robert G8RPI.

Hi Robert,
I thought the same myself but I’m thinking, although I’m not 100% sure, this might actually bolt onto the cat. Like I said I’m not certain but the only way to tell is to get under the car and have a look I guess.

Maybe similar to this?

Hi,
I don't think so. the "input" end has a 3 hole flange same as the input to the cat on the original The replacement drawing has either the CAT or a swaged and split end so you can fit it ofer the stub of the cat outlet after you have cut the rest of the exhaust off.
Replacements are ofte sold in more pieces than the original so you only have to replace the rotten bit.

Robert G8RPI

I’m sort of understanding what your saying... but still a little confused. I’ve found 2 more diagrams which I’m pretty sure are the right ones for the 1.9 Stilo that I have. I’m assuming what your saying is where the cat is in the diagram, is where the centre box is on the exhaust I’m looking to buy?

Hi,
Yes, the first "silencer" s were I'd expect a cat to be. Very difficult to be sure what it should be without knowing the original speification that was fitted.

Robert G8RPi.