Technical urgent urgent HELP NEEDED PLEASE

Currently reading:
Technical urgent urgent HELP NEEDED PLEASE

ade02

New member
Joined
Jul 27, 2012
Messages
38
Points
14
Location
telford west midlands
Does anyone know were to get a fiat stilo 1.8 throttle body with numbers nmh60-011730 cant find one anywhere in the country only fiat head office can get them at £800-£1000 help please
 
Have you actually had the throttle body removed yet? There's usually a Bosch number (Starts 02 usually) or a proper fiat number (starts with a 4 or 5) wrote on the throttle body itself which is what most breakers etc. will go by rather than some number plucked out of the sky by Fiat which you'll never in a million years find other than from them.
 
Then the reason you can't find one is that the numbers you are giving is not a proper part number. If there are no other numbers then you are going to have to match it up another way, either by getting the correct part number from Fiat or by matching it up off looks / engine size alone.

Try messaging a few breakers on ebay to see if they have one available. Unfortunately I've got none from a 1.8 fiat. I can check the shelf at work tomorrow and see if I've got any that might be similar for you though.
 
You may find this useful: I've just done a search on eper and found that the Alfa 1.6/2.0 intake manifolds are the exact same as the 1.8, though the ducting to it is slightly different. If you can get a hold of the manifold section that the throttle body connects to (the part that's faded in the middle picture) then it should connect to the piping that goes to the Stilo cylinder head (1 in top picture). If you do that then you can simply bolt on the Alfa throttle body from the 2.0, it should be plug and play.

Stilo intake manifold:

Stilo 1.8 intake manifold.png

Alfa 2.0 intake manifold:

AR 2.0 Intake manifold.png

AR 2.0 Intake manifold2.png
 
just to let you all know that part number normal motor factors cant get it ,,, its through fiat only new at £761+vat re-con at £561+vat thank god its under warranty they have got a part from Bolton the bloke has gone to fetch it today so should be sorted out later :):)
 
Back
Top