Technical ABS Sensor on front wheel

Currently reading:
Technical ABS Sensor on front wheel

DTstilo

New member
Joined
Feb 13, 2005
Messages
64
Points
23
Location
Stirlingshire
I have a winding notice on my front wheel. I was told that my front wheel bearing needs replacing. So i dismantle the whole strut to get to my Wheel Bearing. Wheel Bearing cost me £50 :cry:

I then discovered that there is an ABS Sensor attached to the strud.

I removed the small nut on the sensor but I cannot get the sensor moved. :mad:

Anybody have an idea how to loosen this sensor without breaking the damn thing. :bang:

I believe these sensors are quite expensive and I don't want to spend money if I can get the thing removed.
 
I have a winding notice on my front wheel. I was told that my front wheel bearing needs replacing. So i dismantle the whole strut to get to my Wheel Bearing. Wheel Bearing cost me £50 :cry:

I then discovered that there is an ABS Sensor attached to the strud.

I removed the small nut on the sensor but I cannot get the sensor moved. :mad:

Anybody have an idea how to loosen this sensor without breaking the damn thing. :bang:

I believe these sensors are quite expensive and I don't want to spend money if I can get the thing removed.

Unfortunately it would most likely break :( You won't even be able to put the new one back in because of corrosion. You should of course try, very gently, spray it with some WD40 and .. good luck (y)
 
Thanks for the reply.

Well I'll try and her it out but like you say maybe it won't work after that.
 
Back
Top