Technical Stilo 3 door passenger safety belt stuck

Currently reading:
Technical Stilo 3 door passenger safety belt stuck

TURNSKIN

New member
Joined
Aug 20, 2009
Messages
10
Points
3
Hi,
After car accident I have problem with passenger safety belt. it’s just stuck at position it was before accident. I dissembler part of interior to see what’s wrong, but could not find anything strange. I found that there is some connector with wires attached to safety belt mechanism, so maybe computer sent some kind of command to block that belt after the accident.
Hoping you will help me!
ty
pavel
 
The belt has a small explosive charging canister that will go off and lock the seat belt in place in the even of an accident. It sounds like this has gone off.
I couldnt tell you how much needs to be replaced but i would certainly think pretty much all of the seat belt mechanism.
 
Lock or actually pull you to the seat? :)

Gurtstraffer.gif
 
Lock or actually pull you to the seat? :)

Gurtstraffer.gif

You are right, its pulls your belt. I found wiki article about this picture: WIKI
I have other questions, does 5 door tensioner will fit in my 3 door model? Also my stilo is left wheel, will tensioner from UK stilo fit my car and what side should i put in passengers side or drivers and passengers parts are the same?
How to be sure, that used tensioner is OK? Just to check if it pulls belt and lets it out?
thank you very much for your replies!
pavel
p.s. found one more image (gif) with pyrotechnic seat belt tensioner
ROTO_FIRE_240_ger.gif
 
Last edited:
If your car has been in an accident and the seat belts were used, they are now useless. They have some stretch in them that is non-reversible. Buy a new or used one - that has not been in an accident.
 
Yes, im planing to buy used one, so i ask you from what model (not only stilo?) will fit in my stilo 3 door 2001y model?
 
Back
Top