hello the cd would kindly serve me setup of the connect nav+ to firmware 7,5 can help please does not know more me where to try you can lincarmi where to unload it thanks to all in advance payment

Hi, Welcome to the FF.

I've never seen version 7.5 available for download.

Here's a link to version 9.8: http://rapidshare.com/files/276572663/CN98.ISO.html

HI thanks of the welcome, now I try to see if with this it works then I make to know you

hello before modernizing the connect nav they are brought to me in Fiat in order to acquire the cd setup but risultatov always same the nav says (change bankrupt language) what to me must make? I would not want to modernize it also because I have fear that jams cannot linkarmi some other cd of setup my nav and the 7,5 car and 2001 and sofware of help you me

Sorry, I do not understand your internet translation very well.

If you want to update the firmware to 9.8, you must follow the instructions exactly as follows:

1. Remove the SIM Card (if installed).
2. Turn on the CN+ unit and clear any error messages using the “ESCAPE” button.
3. Insert the update disk and wait for the unit to display “CD Error” on the screen. Press the “ESCAPE” button to clear this message.
4. Turn off the CN+ unit by pressing the “ON” button.
5. Remove the ignition key, then wait 30 seconds.
6. With the ignition key still removed, switch on the CN+ by pressing the “ON” button.
7. The update procedure will begin. Ensure that the CN+ is not switched off during this procedure! The update may stop for a few moments at 50%, this is normal.
8. When completed, the FIAT logo will appear on the screen and the CD will automatically be ejected. Remove the CD.
9. Switch the CN+ unit off using the “ON” button.

After you update the firmware to 9.8, the language of the CN+ will automatically be in Italian. If you want it to be Italian, you should not need the setup disc.

If you want it to be a different language, you wil need the setup CD. If you want the setup CD, you can download it from here:

http://rapidshare.com/files/276567596/CN_Setup.zip

1. If you want to change the language. Switch the ignition on, insert the Setup CD when it first turns on, and allow the unit to boot up automatically.
2. Press "SETUP" then "Language" to change the language.