General Mud flaps - easy enough to fit?

Currently reading:
General Mud flaps - easy enough to fit?

Re: finally got round to posting mudflap pics

whats with the newspaper?

look ok. nows the time i will tell you the sometimes scrape on multi-stories or when pulling onto flat road from a slope (ie steep drive)
the paper was masking

on one of the pics
081220081220.jpg


you can see all the yellow of the bumper coming through and it looks gash so i masked it off and blew in some satin black so you cant see any yellow from the bumper in the arch...

081220081223.jpg


see?
 
Re: finally got round to posting mudflap pics

the paper was masking

on one of the pics
081220081220.jpg


you can see all the yellow of the bumper coming through and it looks gash so i masked it off and blew in some satin black so you cant see any yellow from the bumper in the arch...

081220081223.jpg


see?

i just had mine right up to the edge
 
Re: finally got round to posting mudflap pics

i just had mine right up to the edge


aye i shouldve but they went on easier where i put them for some reason. done now anyway so its all good.

to reply to the other question i havent managed to take a pic cause it doesnt come out well on the photo where the brackets are because theyve all been blown in black
 
Re: finally got round to posting mudflap pics

Yazza,
I can't find an ebay trader with the name msc trading, could you confirm if that is correct? do you have a link?
How much did all 4 cost you?
Ta
minimad99
 
Re: finally got round to posting mudflap pics

Yazza,
I can't find an ebay trader with the name msc trading, could you confirm if that is correct? do you have a link?
How much did all 4 cost you?
Ta
minimad99

They were about 24 quid a pair so 50ish in total. Ill try get you a link later, using my phone atm. If your car has side skirts the genuine fiat front mudflaps wont fit.
 
Re: finally got round to posting mudflap pics

True they look smart. How much was your grille btw?

About £45 inc delivery from a german ebay site, here's a link to an old thread I posted.
https://www.fiatforum.com/stilo/120363-baunsel-tuning-german-ebay.html
link for stilo stuff - http://shop.ebay.co.uk/merchant/bau..._fromfsb=&_trksid=m270.l1313&_odkw=&_osacat=0
link for the grill - http://cgi.ebay.co.uk/KUHLERGRILL-F...14&_trkparms=72:1301|66:2|65:12|39:1|240:1318
It's the Mattig one, like the standard Fiat one but without the badge.
I've just checked and they've gone up to £60:eek:

Arn't I good to you :cool:
 
This post contains affiliate links which may earn a commission at no additional cost to you.
This post contains affiliate links which may earn a commission at no additional cost to you.
not got round to putting mine on yet so got some pics of fittings etc
this is front + rear flaps and fittings.



[URL=http://imageshack.us]
s1030356ni1.jpg
[/URL]
[URL=http://imageshack.us]
s1030362xq0.jpg
[/URL]

no instructions with mine either so if any one can confirm which type of clips fit where on flaps a fitting guide can be made.


the clippings on the left of the photo are for the rear guards and are used in three places to secure the guard to the rear bumper. really easy. One at the bottom of bumper, two on the side. HOWEVER i used all three on the side as the guards can catch things and it gave them more flex on the underside and less liekly to rip them off.
 
just fitted them, fronts seem perfect fit used 3 clips on side and 1 screw into arch liner(wheel on full lock and used stubby screwdriver).feel very secure.rears didnt seem to want to follow the profile of the bumper that well, sides were ok but corner seems wrong and couldnt get a clamp on the bottom until i cut a section out of the flap, there seems to be no bumper to clamp on where it needs it? anyway theyre on and gap is minimal, 2 clamps on side and one on bottom.
its a 3 door 56 plate could it be a different bumper shape?now to defrost hands.
 
Back
Top