well ive just purchased a set of bk300's in 18"

the only thing is that it has a 45 offset so i need 10mm spacers. i want hubcentric spacers as i want to keep the balance right to reduce trye wear. and due to the spacers and the 4x100 pcd i need longer wobbly bolts

so i need 4 x 10mm hubcentric spacers
and 12 x long wobbly bolts

just wondering if anyone knows the shaft length of normal bolts or even better the ones i will need?

and wheres the best place to get these?

also need camber adjustment bolts as the camber is off and not adjustable taking the allignment out so wer could i get these?

cheers in advance

Have a look on www.wheels.uk.com I got my hubcentric 40mm spacers thru them from Germany.

cheers for that kirbs. ive looked into a few possibilities and so far ive found 4, the one you suggested and:
fiat themselves - 36 for a pair aparently
http://www.performancedriven.co.uk/shop.category.asp?CatID=104 - but i have to email them about enquiring for spacers making me think theyre possibly just a middle man
http://www.performancefx.net/wsfiat.htm - which seem the most reasonable in price. though i still need to find the outer bore of the BK wheels

and i am just going to get 40mm wobbly bolts and hopefuly that should do it

unless anyone knows otherwise?

When you contact them try and do it via email, advise them of your vehicle details, your new wheel details and what you wish to achieve. Then ask them what they recommend. Ask lots of questions so if it all goes pear shaped you have some comeback. I've got to change my spacers for ones that are 10mm smaller as the wheels rub the wheel arch liners with the 40mm ones fitted, so you see it ain't as simple as we may think!!