Hello people mi car is going in to the garage next week to be repaired debadged smoothed and gna have 19" put on it assoon as i get it back also going to get 5% tints all round.

Just one problem i would like to slam the front about 40-60mm on springs or shocks but i only want the front ones i have already lowered the rear any advice. its for the 1.2 stilo 5dr active model

Rent an aerodrome so you can at least drive it somewhere

If you have already lowered the rear of your car then just used the same manufacturer for the front .. job done

Argonought said:

Rent an aerodrome so you can at least drive it somewhere

Click to expand...

:yeahthat:

lol 60mm drop on 19". I hope you're quite young and have a good back.

and on a 1.2 engine aswel. you must be Mad!

Watch out for the springs on the front. I learnt the hard way that you'll not get a brilliant drop as there's significantly less weight to compress the springs on a 1.2 compared with the 1.8, and you'll find most companies use the same part for all Stilos between 1.2 & 1.8 (inclusive).