Technical Scudo 2.0 16v jtd 2001 min start

Currently reading:
Technical Scudo 2.0 16v jtd 2001 min start

justyn

New member
Joined
Feb 5, 2018
Messages
4
Points
2
Hi can anybody help I have a 2001 scudo 2.0 16v jtd it hasn't ran for over a year and won't start. There seems to no signal at the injectors. I have the immobiliser code from fiat but my bosch won't read it. I have changed the cam and crank sensors and still no good???????
 
Hi can anybody help I have a 2001 scudo 2.0 16v jtd it hasn't ran for over a year and won't start. There seems to no signal at the injectors. I have the immobiliser code from fiat but my bosch won't read it. I have changed the cam and crank sensors and still no good???????

hi, :)
how many keys do you have.. and does the immob. light go on briefly then off.

if it doesn't you've got a chip reading issue.:eek:
 
Hi mate I have 1 key and the imob light dies not flash at all. Turns over spot on and runs briefly on a bit of squert but that's it. Is it possible to have the immobiliser taken out of the ecu?
 
On further investigation I have fount 2 wires clean cut near the dl16 I don't know what was connected to them. I need a full wiring diagram for the van realy do you know where I could get one ?? Dealers don't want to help.
 
Back
Top