Hi everybody!

I have a problem with a 2001 Scudo 2.0 JTD. It1s won't start, the starter is running, but I think something cuts down the fuel system. The check light is lighting, and I readed it outwith ELM327 + ScanMaster ELM, and it shows the following troubles: EGR circuit, and Turbo Pressure Regulator Valve fault. Wich can be cut down the fuel system? And where can I find the Turbo Boost Valve?

Thanks!

Sounds like a power supply problem. But to be honest those faults should not stop it starting. Check all fuses in the engine bay fusebox first. Check for cam/crank synchronisation also. Also check the fuel pressure on cranking. It should be circa 280bar to allow the engine to start.

I checked down all fuses in the engine bay fusebox, and all fine. As the computer shows the Common-Rail pressure is already fine too. The engine is stopped down before a red lamp, and the last timing belt change happened maybe 10.000 km ago, so I thing the cam/crank sync is fine too. Can somebody send an electrical schematic for me?

Disconnect the rail pressure sensor and see if it will start.

The Cam sensor made the problem.

Sorry, not the cam. The crankshaft position sensor, wich located on the top of the flywheel. You must remove the air filter box to see it.