Hi All i have X plate Scudo 1.9d that i have just replaced the cambelt on after it had snapped, i sent the head away for repair, i have now rebuilt the engine but it will not start!
I have check the belt timing and all is ok
I have checked the fuel filter and it is full and primed, when i crank the engine over there is no fuel coming from the injectors yet there is plenty of fuel at the pump (Stop solonoid?)
Inside the van when i turn the ignition on all the lights come on and the STOP light flashes continuously (is this normal) the van also does not have central locking so thus there is no remote on the keys so i am guessing the immobiliser work from a chip in the key.
Is it possible that the immobiliser is not disarming thus stopping the fuel solonoid working if so how do i get around this.
Any help much appreciated guys (n girls)
I have check the belt timing and all is ok
I have checked the fuel filter and it is full and primed, when i crank the engine over there is no fuel coming from the injectors yet there is plenty of fuel at the pump (Stop solonoid?)
Inside the van when i turn the ignition on all the lights come on and the STOP light flashes continuously (is this normal) the van also does not have central locking so thus there is no remote on the keys so i am guessing the immobiliser work from a chip in the key.
Is it possible that the immobiliser is not disarming thus stopping the fuel solonoid working if so how do i get around this.
Any help much appreciated guys (n girls)