hi newbie ere does any one have any instructions which they can scan or send me or put up on how to install standard ( not remote) cenral locking as hoping to get it prob just go to scrap yard and take it out of a punto but what stuff do i take out and? how where from thanks pleaaaaaaaaaase let me know thanks.

you will need both locking motors .central locking interface.but most of all,you will need to find out if your car as the wiring harness built in,or you will have a very hard job installing.

IIRC the central locking system runs from the auxillary fusebox, the 55s and 60s don't have one so you'll have to grab that. Its in the glovebox under a pull down flap.

Or buy a cheap remote kit off ebay which fit any car. My mate had one for his corsa and it works perfectly, you havn't gotta do much fiddling with the wires.

thanks for quick response man i should of waited for response got too happy and bought this

http://cgi.ebay.co.uk/ws/eBayISAPI....m=330154494152&ssPageName=STRK:MEWN:IT&ih=014

please let me know what you think

was very cheap will look around car and see if i can see anything in can which looks like it will fit this think otherwise will sell again on ebay and buy something simple.

thanks again