hey there peeps, jus tlooking for a bit of information on where i can get my car delocked, have the boot smoothed and remove the badges and rub strips. I tried to remove the rubstrips and badges myself and there appears to be some black gunk underneath which won't even come off with a stanley blade, i even tried using boiling water on it, but that failed! Nebody know of a bodyshop in the manchester area who might be able to do this to a good stasndard and for the right price? or even further out, just looking for a good job really!
Also can nebody reccommend any way of doing a few of these mods myself, as i am looking to save as much cash as possible

------------------
Pete
------------------
Cruisewilmslow.vispa.com

the black stanley gunk comes of wit a knife and some warm water......but u jus have 2 take sum time, jus make sure u have the will 2 fill in the holes and paint it gen,,,,i found it really fekin annoyin looks nice though , and as 4 other stuff ur gunna need 2 look around ur area m8

Hiya mate, Dont use a stanley knife as you will scratch your paint, dont use any knife there is no need to. You need to scrape at it with a credit card the rounded edge, it takes ages but its worth it if you dont want to be paying to have the side resprayed coz if the scratches

Sensible mods go far

Hey Mate,
Dont use anything like a credit card or stanley blade as it will def scratch ur paint. Use a hair-dryer to heat the rubbing strip then be brave and pull the rubbing strip off

FIAT!!! It Doesn't Move But It Looks Good!!

you can buy smoothed boot panels of ebay for about £40 i saw one on there 2day

1996 Punto 75 sx, 15" bk166 alloys, lowered 40mm & body coloured bumpers.

Yes - this is the trick - I've watched a mechanic do it in a garage - it takes a bit of time, but the badge / strip / whatever comes of cleanly. (Or at least it did for him!)

Here come da judge...

matey if u want to do it urself u need some glue / tar remover.
get the badge off by putting some floss or somthing and then rub through the glue with the thread. dis way u know there will be no accidental scraping of paint. then get a hair dryer as bhoywonder said and heat it up a little bit then use the glue / tar remove and use gloves and run it into the clue and ul see it just peel off easy peasey . u can get the remover from halford for £4.99 i was gonna do mine untill i crashed it monday

there u go matey i even took time and found u da propper instuctions and some illustrations>

www.evicerator.com/cars/grandam/debadging.html

if u want to get it de locked ur gonna have to take it to a garage for dat part

Punto 1.6 Turbo

How much does it cost to get a car delocked?

Punto Sporting 16v MK2 in Black,
GMax Airfilter, Wind Deflectors, Sporting Badges on Skirts.

erm im not to shore ur just gonna have to take it and see im not to shore but u can debadge mk 2 urself well the back not the front but since im not to shore . just take it to the garage and get it done one time

Punto 1.6 Turbo

hey guys iv gt my boot smoothed on my mk1 wid one o those fiber glass panels of ebay n it looks good u cant tell the dif apart frm u wont lose an arm and a leg gettin it done.to get the strips of u need to use a builders heat gun but sent it at 3/4 so dnt bubble or blister paint and its tru if take ur time they will cum off sweet.cant pull badges off a mk1 cz they hav horrible holes bt mk2 cum off no prob.