General got my wheel spacers but...

Currently reading:
General got my wheel spacers but...

Joined
Aug 10, 2003
Messages
125,246
Points
24,395
Location
Essex/Suffolk border
they are just flat not got a pop out bit for center of wheel like web site pic :confused:

web pic.

119_lg.jpg


the ones they sent

https://www.fiatforum.com/gallery/showphoto.php?photo=9593&cat=616
 
reply frpm email said:
Hi,



Hubcentric spacers are only available above 10mm. If your original hubcentric on the hub is greater than the spacer size ordered it is impossible to incorporate a hubcentric. Most hubs have a hubcentric approximately 6 to 10mm, the spacer needs to cover this before it requires a hubcentric. Below this figure there should be enough of the original hubcentric remaining to centralise the wheel.



If this is confusing then please give me a call on 01823 338696.



Regards,



Simon

Performance Driven
:)
 
Dave
I posted about this problem about 2 months ago in the cinquecento section not enough meat on 10mm spacers to make them hubcentric,But jamie86 just bought some 15mm steel ones on ebay with longer studs for £25 a pair and they are Fiat/Lancia/Alfa fit
Cheers
Adrian
 
Hi Dave
Nobody will make them that narrow in hucentric but i`ve heard of people drilling the spacer and using the screws that hold the disc on to mount it centrally you shouldnt have any wheel wobble problems then.
Cheers
Adrian
 
Back
Top