General oil breather pipe part number and ePER model identification

Currently reading:
General oil breather pipe part number and ePER model identification

Miki10

New member
Joined
Oct 22, 2017
Messages
2
Points
1
Hi all,

I'm new around :) I have a 2003 punto 16v 1.2 CVT.
The oil breather pipe got torned up so I'm looking for a spare. I couldn't find on ePER the right sub-model of my car, so looking each part specifically. It seems like part no. 46530837 is the one I'm looking for, but someone suggested 71769226, which also seems right. The latter doesn't show on ePER. On ebay I saw some listings with both numbers for the same item - which one is correctt?
Genearlly, would appreciate some help with finding the right model for my car in ePER for future searches
Thanks!
 
If you have the VIN number you can put that into the ePER search, it *should* then come up with the parts specific to your car.
Is yours a MK2 or MK2B. I know the 8v 1.2 engine changed in the MK2B and could be the same as the Grande Punto. I'm not sure about the 16v engine. It'll all depend on the air filter that your car has. I had the same problem with mine. it has the rectangular air filter so needed the later breather pipe. If you have a round air filter then it'll need the earlier pipe (same as the MK2).
It does certainly look like it is the one you've mentioned as that part is used on both the MK2 (upto 2003) and the MK2B (2003-2006)

https://www.ebay.co.uk/itm/FIAT-PUN...OIL-BREATHER-PIPE-HOSE-46530837-/291667482355
 
Last edited:
This post contains affiliate links which may earn a commission at no additional cost to you.
Back
Top