my abarth wheel centres came today, how to i get the little cap out of the middle of the wheel so that i can stick them on?

also they look a bit big, are they all the same size? as in one size fits all ?

charlie

you have the take the wheel off, and use the handle of a hammer or similar and hit it from behind until it comes off, shouldnt they be 50mm? (if i remember correctly)

i just used a knife with some tape round it so i didnt scratch my alloys

marky23 said:

i just used a knife with some tape round it so i didnt scratch my alloys

Click to expand...

dont wanna see how angry you get if you curb them.

Easiest and safest way is as decibed by Uno_94, just tap them out from the back, the lugs dnt snap, and there is no risk of cracking/splitting the back of them as long as you use something with a similar diameter to the inside of the wheel and back of the centre cap

cool, will getthat doen tomorrow or thursday

cheers guys

charlie

Are they the genuine fiat ones or are they the stickers you get off ebay? If they are the proper abarth ones i would definately take the wheels off to fit them as you will mark your alloys....FACT Also be careful with them because in this cold weather they are prone to snapping, when i fitted mine the other day i pushed them into the wheel centre and the red abarth bit came away from the black backing and i had to super glue them back on :bang: But if you got the sticky ones like on ebay then its a piece of ****

they from www.abarthbadges.com

charlie