- Joined
- Jan 20, 2013
- Messages
- 6,151
- Points
- 1,228
Technical connecting to body ecu
- Thread starter flisko
- Start date
Currently reading:
Technical connecting to body ecu
Depends what your trying to do. You may need a Elm327 lead
- Joined
- Aug 31, 2013
- Messages
- 144
- Points
- 45
As above ^
I have to use my elm lead to talk to the body ecu.
I have to use my elm lead to talk to the body ecu.
- Joined
- Jan 20, 2013
- Messages
- 6,151
- Points
- 1,228
i got this too, but doesnt want to connect, it connects fine to engine ecu like that cable one
want to do proxy alignment
Attachments
Airbag requires red adaptor, abs requires green (I think) so suspect the cable is faulty/broken when switched to non adapted state
- Joined
- Jan 20, 2013
- Messages
- 6,151
- Points
- 1,228
you mean blue cable set to 12/13 far right?
- Joined
- Aug 31, 2013
- Messages
- 144
- Points
- 45
The adapters I bought were from here: http://www.idiagnostics.co.uk/
- Joined
- Jan 20, 2013
- Messages
- 6,151
- Points
- 1,228
this is same as chinese ones just 4 times more expensive
- Joined
- Aug 31, 2013
- Messages
- 144
- Points
- 45
I was of the same opinion until my cheap Chinese one wouldn't work properly. You need the coloured adapters to connect the elm to the correct pin the body ecu is on
- Joined
- Apr 8, 2008
- Messages
- 16,742
- Points
- 3,186
With the first set of cables do you need the full version of fiatecuscan to be able to scan the power steering ? Or can you do this on the trial version?
- Joined
- Apr 8, 2008
- Messages
- 16,742
- Points
- 3,186
IIRC you need full to diagnose power steering
Ziggy
Ziggy
