anyone know how to remove electric window mechanism, cant see any bolts or anything, there are only 3 bolts on the motor itself

it might be held on with Rivet's.
you wouid have to drill them's out and add some small 8mm/10mm bolts
if so or re;rivet .,

drill on right top where it looks like a bolt?

no.
the bolts or rivets shouid be in the metal of the car door it self,

can you post up a full pic /view of the door,

<Ignore this> that picture is completely useless.

Oldhammer is trying to help but you're looking in completely the wrong place<Ignore this>

edit: looking at that picture you've already removed the bolts that hold it in !!!

so what are you actually asking ? you feed it out through the hole in the inner door skin

flisko,
you will need to remove the full mech,
this will involve removing the door glass,

don't try removing motor from mech inside door,you will rip you hands to peices.

the mech is bolted to the metal of the car door,
your pic is no use to show where bolts are located,

yea there was a plastic clip holding it to the window which i pushed to the side and it poped off

glad to see you got it sorted,
last time ichanged one icut my fingers to bits.

fiat give no thought on removing sharp edges,

oldhammer said:

glad to see you got it sorted,
last time ichanged one icut my fingers to bits.

fiat give no thought on removing sharp edges,

Click to expand...

if i have to pull them clips off i put my yellow gloves on
if its winter i waft it with the heat gun firsts